China Hot selling Good 1 hp 12v dc 24v motor dc 12 volt gearbox motor small electric motor with Hot selling

Warranty: 3months-1year
Model Number: TJ-DC Motor
Usage: For industrial machines
Type: Permanent Magnet DC Motor
Torque: 23-35Nm
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Explosion-proof
Speed(RPM): 1800 RPM
Continuous Current(A): 2-5A
Efficiency: IE 4
Color: Black or according to customer’s demands
Material: Cast Iron or Aluminium Alloy Casing
Noise Level: Less Than 60db
Mounting Position: Foot mounted, flange mounted
Bearing: CZPT bearing & Homemade bearing
Input Form: IEC flange for mounting motor
Output Form: Solid shaft, hollow shaft
Quality Control System: ISO9001:2000
Quality guarantee: 1 year
Manufacturing Experience: 7 years
Certification: ce, FCC
Packaging Details: Carton or wooden case packaging,also can according to customers’ requirements
Port: HangZhou

Good 1 hp 12v dc motor,dc 24v motor, dc motor with gearbox 24v

♦NMRV/NRY Series Worm and Gear Motor
dc electric motors 24 volt with gearbox contains worm gear reducer and motor(Including 3 phrese AC motor,single AC motor,DC servo motor and DC PM motor).The square aluminum gearbox is manufactured based on GB157188 cylindrical gear parameter.During the process, many advanced technologies are adopted.So it has compact structure, good appearance and excellent heatsink when runing.

This series dc geared motor has the following characteristics:smooth running, low noise, large transmission ratio and strange loadcapacity and it may match with different kinds of motors for realizing speed adjustment.

♦Note

1.No more than 4000m above sea level.
2.Ambient temperature:-25~40degree.
3.Relative humidity ≤95%(at +25degree).
4.The followed temperature rise: no more than 75K(when 1000m above sea level) degree DC motor with gearbox /DC Worm Gear Motor

♦Working principle:
Gearbox is used to transfer rotation and torque from motor to working machine,the function is to decrease speed by gears and increase torque.

Dc electric motors 12/24/48 volt Specification:
Power:200w/300w/500w/750w

Gearbox Parameter:

Detail of PMDC Motor (with brake or not)

Type:
High precision NMRV WORM GEARBOX SPECIFICATIONS
Model:
Center Distance:25,30,40,50,63,75,90, 3D printer wheel V nylon pulley wheels with bearings DV plastic wheel with bearing POM pulley 110,130
Ratio:
5,7.5,10,15,20,25,30,40,50,60,80,100
Color:
Blue/Silver White
Material:
Aluminium Alloy
Worm Gear- Cooper-10-3
Worm-20CrMnTi with carburizing and quenching, surface hardness is 56-62HRC
Shaft-chromium steel-45
Packing:
Carton box/per set(With foam board inside)
Bearing:
Brand “NSK” Bearing
Seal:
NAK Seal from ZheJiang
Warranty:
1 year
Input Power:
0.1kw,0.55kw,0.75kw,1.1kw,1.5kw,2.2kw,4kw,5.5kw,7.5kw
Usages:
In industrial machine: widely used in packing, 7L6 521 102 P Driveshaft Prop Shaft Fit For VW Porsche Cayenne Touareg 2003- 2571 Drive shaft 7L6521102P printing,textile machine,as well as woodworking,
glass and plastics,food stuff,ceramics,chemical,etc.
IEC Flange:
B5,B14
Lubricant:
Synthetic & Mineral

Packaging & Shipping
PACKAGING AND SHIPPING

Related Products
MORE PRODUCTS

Product Uses
APPLICATION

Company InformationABOUT US

AdvantagesWhy do you choose us?
Your choice,We promise!

Eight reasons to choose us:

1. Perfect service system and after-sale protection.
2. Quality problems will be solved within 24hours.
3. One-to-1 customer service tracking processing.
4. Companies carry out the ERP management, improve enterprise fast response.
5. Quality assurance, 1 year warranty.
6. Supporting professional matched other equipments.
7. The company has more than 1 product testing units, the implementation of ISO9001: 2015.
8. Unique development and design capabilities to meet the needs of special-purpose equipment manufacturing.

Five Core strengths:

1. The first domestic independent R & D manufacturer and 13 years of professional manufacturing.
2. Casting exquisite, beautiful, practical and durable.
3. Complete specifications, cost-effective and spot supply.
4. Independent research and development, special specifications can be customized.
5. Selected materials, high-tech treatment, up to the international standard test.

CertificationsCERTIFICATE

FAQ
FAQ
1.When can I get the quotation?
We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, High Torque 45mm 12V 24V PG45ZY45 Series DC Gear Reduction Motor for Robot so that we can regard your inquiry priority.

2.How should I place an order?
Please let us know the model number based on our specs for powder clutch, powder brake, air clutch, air brake, electromagnetic clutch, electromagnetic brake and safety chucks, other transmisson parts.
For air shafts,air adapter please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.

3.What’s your MOQ basis?
Normally, we don’t have MOQ request, except the customized mini clutches/brakes.

4.What about the lead time for production?
Honestly, it depends on the order quantity and the type of our products. For powder clutch, powder brake, tension controller,which is about 3-5 days. For safety chucks, air shafts which need about 15-30days.

5.What is the term of shipment?
We can arrange with EXW, FOB, CIF…etc. You can choose the most convenient 1 or cost-effective way.

More concerned for our products , please do not hesitate to inquiry now!

> YVF2-132 2.2KW3KW4KW5.5KW7.5KW Chinese Factory Induction Motor Variable Frequency 3 Phase Asynchronous Motor >>CLICK HERE GO TO THE HOMEPAGE

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Hot selling Good 1 hp 12v dc 24v motor dc 12 volt gearbox motor small electric motor  with Hot sellingChina Hot selling Good 1 hp 12v dc 24v motor dc 12 volt gearbox motor small electric motor  with Hot selling