New Design C400zy Truck Mounted Water Well Drilling Rig

New Design C400zy Truck Mounted Water Well Drilling Rig

New design and style C400ZY truck mounted h2o well drilling rig


Primary features:

C400ZY truck mounted drilling rig is created by our engineers it adopts truck mounted and is a rotary drilling rig.

The truck chassis adopts the 6X4 particular crane chassis of manufacturer SINOTRUK, the primary transmit, transmission energy, gearbox, sets of windlass, mud pump, sewage pump,mast are setup on the chassis.

This rig is a rotary drilling rig with directional circulation, which is outfitted with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is outfitted with a good drilling bit.

The energy of drilling rig comes from the truck engine, the rig sets up distribute implement and hydraulic program.

We can established up the spare electric powered motor and clutch put into action according to client’s requirement, so that the rig can function with diesel engine or electric motor.

We can set up a generator (15kw) , so that it is usefulness to illuminate or work at night.

The incorporating stress employ is hydraulic, so it has a substantial performance when the rig drill on mud rock and weathering development via employing the adding force apply.

The grasp driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, grasp driving clutch technique are air operated.

The appearance of rig is quite, it has a substantial performance since of possessing a greater torque of the turntable, it is largely employed for h2o properly, development, countrywide protection building basis, geological exploration, geothermic nicely and other basis operating, it is well-known with domestic and international customers.


CZPT Parameter

CZPT parameter
Drilling depth(M) eighty four hundred
Drilling diameter(mm) 1500 five hundred
Speed of turntable(r/min) 21.23663.2100.615520.2(reverse)
Torque of turntable(KN.m) 1810.663.eighty two.518.9(reverse)
Single rope lifting potential of main windlass(KN) forty five
The capacity of main windlass(KN) 270
Single rope lifting ability of hydraulic windlass(KN) forty
The capability of hydraulic windlass(KN) one hundred sixty
The lifting capacity of hook(KN) 270
Bearing capacity of mast (KN) 270
The peak of mast (mm) 11500
Bearing capacity (t) 30
Pipe Kelly (mm) 108×108×7500
Assistant pipe (mm) Ф89×10×5500
CZPT pump Model CB-HP80/forty
Pump supply (ml/r) 80/forty
Rated speed (r/min) 2000
Rated force(MPa) twenty
BW850/2A plunger pump Diameter of cylinder (mm) 150
Stroke of piston (mm) one hundred eighty
Principle of circulation (L / min) 600 850
Rated force (Mpa) three two
Pounding times (min-1) fifty eight 82
Diameter of suction tube (mm) 127
Diameter of drain pipe (mm) 64
Enter velocity (r / min) 470
Input power (kw) 40
Total proportions (mm) 2000*1030*1400
Weight (t) 1.five
Truck chassis Design TAZ5183TZJ
CZPT kind 6×4
Motor CA6DE3-20E3(CZPTe III emission CZPT)
Dimensions (L*W*H)(mm) 11110×2490×2500
CZPTtric generator Product MF
Rated energy (kw) fifteen
Rated voltage(v) 400
Rated existing(A) 27
Velocity (r/min) 1500
Frequency(Hz) 50
CZPT stage IP21
Insulation Course H
The ideal functioning equipment (or speed) fifth equipment(one thousand-1400r/min)
The optimum speed(Km/h) 75
Fat (kg) 19340
Transport dimension(L*W*H)(mm) 12160*2490*3440
Working dimensions(L*W*H)(mm) 11110*2490*13110


Connected CZPT

Business Profile


Glorytek CZPT (ZheJiang ) Co., Ltd. is an built-in company specialised in manufacturing and exporting best top quality drilling products and drilling areas for much more than twenty years. We are supported and assisted by extremely experienced R&D team and enginners that empower us to complete all the assigned initiatives successfully as for each clients’ needs.

Our factory addresses an area of 250,000 sq. meters, design area is about one hundred fifty,000 sq. meters, getting machining equipment, CNC processing heart, friction welding equipment, screening equipments etc. in excess of 200 sets and more than 600 staff.

Our products have been exported more than 60 international locations, such as Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, Usa, Canada, Haiti etc.



Q: How can we pick a suited drinking water well drill rig?
A: We typically advise a ideal model according to drilling depth, drilling hole dia. and layer situation on website.

Q: Are you a manufacturing unit or a trading company ?
A: We are an integrated corporation specialized in producing and exporting.

Q: What is your payment conditions?
A: We can accept T/T,L/C.

Q:.What is your MOQ? How extended is the shipping and delivery time?
A: Our MOQ is 1 sets. Normally for drill rig, the shipping time is about 25-30 times soon after obtaining payment, the drilling instruments would be about 15 times.

Q:. How extended is the warranty?
A: The assure time period for mainframe is one particular yr (excluding the fast put on components).

Q: Can we print my Logo on the goods?
A: Yes, we can. We assistance OEM .

New Design C400zy Truck Mounted Water Well Drilling Rig